Merlin 4I Energizer With Keypad
Merlin 4i energizer with keypad includes a keypad for controlling and programming the energizer. The energizer can be installed near the fence and the keypad can be located where it is most convenient for the user. This allows the user to control the energizer remotely, with up to four keypads.
Merlin 4i Energizer with keypad Features:-
- 3.7 Joule output energy (single zone)
- Robust and flexible design for home and commercial security
- Built-in alarm monitors tampering or faults on the high voltage and earth fence wires
- Connectable to armed response radio or GSM module
- Lightning and power surge protection
- Intelligent power saving to extend battery life
- Powered by 230V mains and includes a built-in battery for backup power
- Built-in gate alarm input to monitor if the gate is open or closed
- A gate chime is available to alert that the gate has been opened or closed
- The fence voltage outputs can be adjusted using the keypad
- The siren and gate outputs can be bypassed using the keypad
Specifications:
| Enclosure size | 285(L) x 212(W) x 120(D)mm |
|---|---|
| Weight | 3.1kg excluding battery (7AH) 5.3kg including battery (7AH) |
| IP rating | IPx4 |
| Operating temperature | -10°C to 50°C |
| Operating humidity | < 80% non-condensing |
| Electrical supply voltage | 240V |
| Typical power consumption | 18VA (normal operating conditions) |
| Standby Time | 24hrs (fully charged battery) |
| Energy output | 3.7 Joule per zone (500 Ohms load) |
| Open circuit voltage | 8000V |
Reviews
There are no reviews yet.