45U 2100×660×660 Outdoor Data Cabinet

📏 Mechanical Specifications

• Rack Units (RU): 45U

• External Dimensions:

  • Height: 2100 mm

  • Width: 660 mm

  • Depth: 660 mm

• Rack Mounting Standard:

  • 19” EIA-310 compliant vertical rails (4-post)

• Material Options:

  • Cold-rolled steel or galvanized steel (1.5–2.0 mm thick)

  • Optional: 304/316L stainless steel for high-salinity or corrosive environments

• Finish:

  • UV-stabilized outdoor-grade powder coating

  • Standard: RAL7035 (light grey)

  • Custom colors on request

• Static Load Capacity:

  • 200–300 kg (reinforced frame)

---

🌧️ Environmental Protection

• Ingress Protection Rating:

  • IP55 (standard)

  • IP65/IP66 (optional, depending on sealing and cooling method)

• Cooling & Ventilation:

  • Passive (default):

    • Filtered louver vents (top and bottom airflow)

  • Active (optional):

    • Dual or quad exhaust fans with thermostat

    • Thermoelectric (TEC) cooling system

    • Outdoor-rated air conditioner with humidity control

• Sun Shield & Weatherproofing:

  • Double-layer top or full roof canopy

  • Optional solar reflectivity coating

• Operating Temperature Range:

  • Passive: -25°C to +45°C

  • With active cooling: -40°C to +55°C

• Humidity Tolerance:

  • Up to 95% RH (non-condensing)

---

🔐 Security & Vandal Resistance

• Front Door:

  • Single or double-leaf, fully sealed steel door

• Rear Door:

  • Optional for dual-access installations

• Locking System:

  • Standard 3-point key-locking handle

  • Optional:

    • Digital keypad

    • RFID access

    • Padlock bracket

• Tamper Protection (Optional):

  • Intrusion sensors, tamper alarms

  • Reinforced hinges and anti-pry door seals

---

🧰 Internal Configuration

• Mounting Rails:

  • Four adjustable 19” vertical rails

  • U-marked (45U) for accurate mounting

• Shelves (Optional):

  • Fixed or sliding shelves

  • Battery/inverter trays

• Cable Entry:

  • Bottom cable gland plate with IP-rated grommets

  • Optional: side cable entry ports

• Grounding:

  • Copper ground bar with bonding to door and chassis

• Thermal Insulation (Optional):

  • Foam or reflective lining inside doors/walls

---

⚙️ Power & Monitoring (Optional)

• AC Power Distribution:

  • 6–12 outlet PDU (IEC C13/C19 or universal)

• DC Integration:

  • -48V support, DIN rails, fuses, battery systems

• Remote Monitoring:

  • Temperature, humidity, door sensor

  • Smoke detection

  • SNMP/GSM/RS485/Modbus telemetry module

• Interior Lighting:

  • LED lighting with door sensor or manual switch

---

🧱 Mounting Options

• Ground/Floor Mount:

  • Bolt-down holes in reinforced base

  • Optional concrete plinth or anti-tilt frame

• Wall Mount: ❌ Not suitable due to size/weight

• Pole Mount: ❌ Not recommended; exceeds safe load for pole mount kits

---

📦 Common Use Cases

• Telecom BTS / Core / Remote base station

• 5G infrastructure or microwave transmission nodes

• Edge computing and micro data center

• Utility SCADA control system

• Smart grid control node

• Surveillance (IP NVRs + switches) + backup power

• Renewable power controller + battery enclosure