42U – 1970x660x660 Outdoor Data Cabinet

📏 Mechanical Specifications

• Rack Units (RU): 42U

• External Dimensions:

  • Height: 1970 mm

  • Width: 660 mm

  • Depth: 660 mm

• Mounting Standard:

  • 19” EIA-310 compliant vertical rails

• Material:

  • Galvanized or cold-rolled steel (1.5–2.0 mm)

  • Optional: Stainless steel (304 or 316L) for corrosive/coastal zones

• Finish:

  • UV-resistant polyester powder coating

  • Standard: RAL7035 (light grey)

  • Custom RAL colors available

• Load Capacity:

  • Static: 200–300 kg depending on internal framing

  • Reinforced base frame for heavy batteries/inverters

---

🌧️ Environmental Protection

• Ingress Protection (IP) Rating:

  • IP55 (standard), IP65/IP66 (optional)

  • Dust-tight and protected from rain, hose spray, or temporary flooding

• Ventilation & Cooling:

  • Standard Passive:

    • Filtered louvered vents (bottom-top convection)

  • Optional Active Cooling:

    • Dual or quad exhaust fans with thermostat

    • TEC (thermoelectric) cooling

    • Outdoor-rated AC unit with condensate drainage

• Sun Protection:

  • Double-wall top cover or full-body sun shield (optional)

• Operating Temperature:

  • Passive: -25°C to +45°C

  • With cooling: -40°C to +55°C

• Humidity: Up to 95% RH (non-condensing)

---

🔐 Security & Access

• Doors:

  • Front single-leaf (or dual-leaf) gasketed steel door

  • Optional rear door for access to deep rack equipment

• Locking Mechanism:

  • 3-point key-locking handle

  • Padlock provision

  • Optional digital lock or RFID access

• Vandal Resistance:

  • Reinforced frame, hidden hinges

  • Optional door sensors or tamper alarms

---

🧰 Internal Configuration

• Mounting Rails:

  • Adjustable 19” vertical rails (4-post)

  • U-numbered for precision

• Shelving Options:

  • Fixed shelf, sliding tray, or battery shelves

• Cable Entry:

  • Bottom cable gland plate with compression glands

  • Optional rear or side brush entry

• Grounding:

  • Integrated copper grounding bar

  • Door and chassis bonded via grounding wires

• Insulation (Optional):

  • Internal foam layer to reduce thermal swing/condensation

---

⚙️ Power & Monitoring (Optional)

• PDU (AC):

  • 6–12 outlet strip (IEC C13/C19 or universal)

• DC Power Support:

  • -48V telecom rectifiers, charge controllers

  • DIN rails for fuses, MCBs

• Monitoring Modules (Optional):

  • Temperature / humidity sensor

  • Smoke detector

  • Door open sensor

  • Remote alerts via SNMP, Modbus, or GSM

• Interior Lighting:

  • LED light with magnetic switch or manual toggle

---

🧱 Mounting Options

• Pad / Floor Mount:

  • Pre-drilled base for anchor bolts

  • Optional raised plinth

• Pole Mount: Not recommended at this size

• Wall Mount: Not supported at this size

---

📦 Typical Applications

• Telecom BTS / 4G/5G node

• Edge data center equipment

• CCTV headend + NVR/DVR

• Fiber or ISP aggregation cabinet

• Solar-powered systems (with batteries and inverter)

• Smart grid / utility telemetry control panel

• Industrial SCADA or IoT edge node