32U – 1670x660x660 Outdoor Data Cabinet

📏 Mechanical Specifications

• Rack Units (RU): 32U

• External Dimensions:

  • Height: 1670 mm

  • Width: 660 mm

  • Depth: 660 mm

• Rack Standard:

  • 19” EIA-310 compliant mounting rails

• Material Options:

  • Galvanized steel / cold-rolled steel (1.2–2.0 mm)

  • Stainless steel (304 or 316L) for coastal/harsh conditions

• Finish:

  • UV-stabilized polyester powder coat

  • Standard color: RAL7035 (light grey)

  • Custom RAL colors available

• Static Load Capacity: Up to 150–200 kg (depending on mounting and bracing)

---

🌧️ Environmental Protection

• Ingress Protection (IP) Rating:

  • IP55, IP65, or IP66 (model-dependent)

  • Fully sealed with compression-locking gasket for water/dust resistance

• Cooling & Ventilation Options:

  • Passive (Standard):

    • Filtered louvered vents

    • Top/bottom air paths

  • Active (Optional):

    • Dual or quad fan kit (roof or side-mounted)

    • Thermoelectric (TEC) cooling system

    • Outdoor-rated AC unit with thermostat and condensation drain

• Sun Shield:

  • Double-walled roof or full external sun shroud (optional)

• Operating Temp Range:

  • Passive: -25°C to +45°C

  • Cooled: -40°C to +55°C

---

🔐 Security & Construction

• Door Configuration:

  • Single front door (sealed and gasketed)

  • Optional rear door or side maintenance access panel

• Locking System:

  • 3-point lock with key-locking handle

  • Padlock loop (optional)

  • Electronic access control (RFID/digital keypad) available

• Anti-Vandal Design:

  • Reinforced door and hinges

  • Hidden or tamper-resistant fasteners

  • Optional alarm sensors (door open, vibration)

---

🧰 Internal Configuration

• Mounting Rails:

  • Adjustable depth 19” rails (2 or 4-post)

  • U-marked for consistent equipment placement

• Shelving Options:

  • Fixed or sliding shelves

  • Battery tray or inverter support brackets

• Cable Management:

  • Bottom gland plate with IP-rated compression glands

  • Optional: side-entry ports or brush plates

• Grounding:

  • Integrated copper ground bar

  • Ground studs on door and chassis

• Insulation (Optional):

  • Thermal foam lining to reduce heat and condensation

---

⚙️ Power & Monitoring (Optional)

• AC PDU:

  • 6/8/10-way IEC or universal socket strip

• DC Integration:

  • -48V telecom support

  • DIN rail mounts for circuit breakers, fuses, converters

• Monitoring & Control:

  • Temperature and humidity sensors

  • Smoke, intrusion, and door-open detectors

  • SNMP, Modbus, or GSM controller with alerts

• Lighting:

  • Interior LED with magnetic switch or manual toggle

---

🧱 Mounting Options

• Ground / Floor Mount:

  • Bolt-down mounting holes in base

  • Optional pedestal or plinth

• Pole Mount:

  • Possible with heavy-duty bracket kit (not standard due to size)

• Wall Mount:

  • Not recommended at this size/weight

---

📦 Typical Applications

• Large outdoor telecom site (4G/5G nodes, microwave relays)

• Power systems with inverters and batteries

• Smart city infrastructure hubs

• Fiber optic aggregation or POP node

• NVRs, servers, or switches in surveillance deployments

• Battery backup system enclosures (off-grid solar, wind, etc.)